Towertalk
[Top] [All Lists]

Re: [TowerTalk] need advice on 9/16 or 5/8 Rope, not for dipoles

To: j_hector_garcia@sbcglobal.net, towertalk@contesting.com
Subject: Re: [TowerTalk] need advice on 9/16 or 5/8 Rope, not for dipoles
From: "knormoyle@surfnetusa.com" <knormoyle@surfnetusa.com>
Date: Wed, 30 Jun 2010 13:14:22 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
well, I would reinforce my opinion then.
If you think humans grabbing a 9/16" rope with their hands in front of them, 
maybe wearing gloves, meets the safety requirements you described ($100k 
damage) 
well then okay.

Me, I would use rope ascenders and a belay device.

9/16" rope and hands/gloves is pretty minimal safety.



------- Original Message -------
>From    : Hector Garcia XE2K[mailto:j_hector_garcia@sbcglobal.net]
Sent    : 6/30/2010 12:29:24 PM
To      : towertalk@contesting.com
Cc      : knormoyle@surfnetusa.com
Subject : RE: Re: [TowerTalk] need advice on 9/16 or 5/8  Rope, not for dipoles

 Just to make it a little clear ,  the 200lb load is  maybe a  5k dlls antenna, 
 
or maybe a  200lb piece of steel that can cause  100k dlls in damages or KILL 
people
  9/16   5/8 or  3/4  is more comfortable to use in your hand  with globes 
I want something  I can trust and  handle with no  problems,  is maybe too much 
but   will be plenty of room to have no worries 

Just found at Ebay  Dacron 3/4  600ft spool,   as an option at good price, but 
will  be looking for something  better , but at least this will solve  my 
immediate needs

Will continue to  accept more possible options, thanks for the advices  and 
experiences 

Tks in Advance


 J. Hector Garcia XE2K / AD6D
Mexicali B.C  DM22fp
P.O.Box 73 
El Centro CA 92244-0073
USA
 http://www.xe2k.net";  target="_new"> http://www.xe2k.net > 
 http://www.dxxe.org";  target="_new"> http://www.dxxe.org > 




________________________________


I think when people say they need a 9/16" rope for 200 lb loads, something 
seems 
wrong.

If you need to handle the rope, it might be cheaper to buy a rope ascender (or 
two)  to provide grip/pull on the rope, and use a narrower rope.


Has anyone used this CWC polyester rope (double braided, made in china)
google "CWC 347040"
available a couple of places.

CWC 347040 $150 for 3/8" x 600'

So that would be my thought: use the minimal diameter for the load, the right 
material/construction for the stretch requirements and abrasion resistance, and 
solve the gripping problem with something else (if that's what the diameter of 
1/2" or 9/16" comes from)
braided would be nicer than a laid rope.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
 http://lists.contesting.com/mailman/listinfo/towertalk 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>