Jim,
I have the same here, I used 2" and it was still a struggle to get two runs
of LMR-400, Steppir and Rotator control cable through it. I think you would
struggle with 1 1/2" conduit.
Mike, K6BR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Miller
I'm planning to run about 70ft of conduit to service two RG213 (or Bury
Flex) runs and a single Channel Master 3 conductor control wire. It will be
a straight run with 90 degree sweeps at both ends.
I'm planning on moving from this house in 2 years and really don't plan on
investing more on antennas here so additional runs aren't really an issue.
Will 1.5" electrical PVC be adequate to handle this or do I need to go to
2"?
thanks
jim ab3cv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|