TexasRF@aol.com wrote:
> This ain't hard guys. If you have a Sawsall , you use it. If you have a
> grinder, you use it. If you have a hacksaw, you use it. If you have nothing,
> then you go to Home Depot and decide which option you want to buy or see a
> friend or neighbor to borrow a tool.
>
You forgot "chop saw" <:-)) as you can stick one leg of the tower in
there at a time. However I don't like to use abrasive wheels on any soft
metal like aluminum or Galvanizing as they load up and can become
unbalanced leading to a dangerous condition where they can come apart.
I think most make the mistake of acquainting 25G with the hardness of
EHS and there is no comparison. 25G gets its strength from the diameter
of the tubing, wall thickness, and cross bracing. It's like cutting
butter compared to EHS.
73
Roger (K8RI)
>
> Anyone struggling with a problem like this needs to get some help from
> friends with experience.
>
> 73 to all,
> Gerald K5GW
>
>
>
>
>
>
>
>
> In a message dated 4/2/2010 2:13:25 A.M. Central Daylight Time,
> K8RI-on-TowerTalk@tm.net writes:
>
>
>
> Roger (K8RI) wrote:
>
>> Cqtestk4xs@aol.com wrote:
>>
>>
>>> I always use a grinding blade on my circular saw. It cuts like butter
>>> through 25.
>>>
>>>
>>>
>>>
>> So does a plain old hand held hacksaw when it comes to 25G. It's very
>> easy to cut.
>>
>>
> I should have added you can probably cut all thee legs off in less than
> 30 seconds with a little practice. <:-))
>
> 73
>
> Roger (K8RI)
>
>> I've made base sections out of solid rod and steel plate, pipe and steel
>> plate, and just short sections of tower. I prefer the solid rod. It may
>> be heavy, but you never have to worry about drainage or freezing.
>>
>> OTOH the base does not *have* to be 5', it can be 6, 7, 8...what ever is
>>
>
>
>> handy.
>>
>> 73
>>
>> Roger (K8RI)
>>
>>
>>> Bill KH7XS
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
>>>
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|