Towertalk
[Top] [All Lists]

Re: [TowerTalk] N - clamp style connector

To: "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] N - clamp style connector
From: "Perry - K4PWO" <k4pwo@comcast.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 11 Mar 2010 01:30:20 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The grommet is to weather proof the connector.  If you have the "knife edge"
type shield retaining washer (where  the grommet fits over the "knife"
edge), you will find that the grommet is split into two concentric pieces
when you apply correct torque to the retaining nut.  It adds little to the
retention of the coax.

73 de Perry - K4PWO


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of jimlux
Sent: Wednesday, March 10, 2010 10:33 PM
To: Tower and HF antenna construction topics.
Cc: w4lde@numail.org
Subject: Re: [TowerTalk] N - clamp style connector

Steve Katz wrote:
> As someone who's actually set up assembly lines to install Type N
> military connectors for USAF contracts (20+ years ago!), I might add one
> of the biggest problems hams have is misapplication of connector vs.
> coax.  Even a skilled expert who's assembled thousands of N connectors
> on cables is going to be highly challenged if the right materials aren't
> presented to him.
> 
> As an example, I see a lot of hams using the UG-21D/U connectors from
> the Amphenol "RFX" series (82-202-RFX or equivalent).  You might note
> those are intended for "RG8, RG9, RG213, RG214" cables.  Well, this is
> downright impossible.  RG8 and RG213 are single shielded and smaller in
> O.D. than RG9 and RG214 which are double-shielded.  For a "clamp"
> connector, how can a single design work for cables having either one or
> two shields, and having two different O.D.s?  Impossible.
> 
> So what Amphenol did, in their infinite wisdom, was make the connector
> suitable for double shielded cable with a larger O.D., and figured
> somehow we'd make that work for the other stuff.  It really doesn't.

Isn't that why there's little funky rubber/silicone grommet looking 
things in some installation kits. I always figured they're to make the 
cable "thicker" so it fits the connector.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>