The cable runs on my SteppIR total 220 feet. That's why SteppIR offers
a higher voltage power supply (33VDC) for longer cable runs. Works
fine, even at 7500 feet elevation in the Rockies where we've just had
about 4 feet of snow. Never heard of a motor failure either.
Everyone has equipment issues at one time or another, whether it's with
a "regular" yagi or a SteppIR. The SteppIR reflector (like this one)
tends to draw people seeking advice or assistance with issues, rather
than those who don't have a problem with their equipment...those not
having issues rarely just hop on the reflector to say - "Wow, this is
great! Still no problems!!"
EHam reviews tend to be from people who have nothing but praise (5.0
ratings) or those who have suffered a problem and pass out 0.0 rating,
as well as those who don't even own the item being reviewed. Caveat
emptor...
73,
Joe
WDØM
http://www.wd0m.com
john@kk9a.com wrote:
> I am not trying to start rumors, in fact I think that the adjustable element
> is a fantastic idea. Perhaps the motors itself did not actually fail in
> many cases, but there were other mechanical issues that prevented the
> elements from extending and retracting properly. Here are some reviews
> addressing the issue: http://www.eham.net/reviews/detail/3858 by GM4YSN
> KL7GS or IW0CMM. The point of my post was that you should consider if you
> want a mechanically complex antenna if it is mounted in a location that is
> less accessible for possible repairs. There are other factors to consider
> as well since the SteppIR may not work well using long cable runs.
>
>
>
> To: "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
> Subject: Re: [TowerTalk] LP v SteppIR
> From: "Mike" <noddy1211@sbcglobal.net>
> Reply-to: "Tower and HF antenna construction topics."
> <towertalk@contesting.com>
> Date: Fri, 22 Jan 2010 18:21:13 -0800
>
> I have monitored the Steppir group from the beginning and can't remember one
> Stepper Motor failure and personally know six people with Steppir antennas.
> Stepper Motors are just about the most reliable motor around, they are used
> in the packaging industry 24 hours a day and I have never seen a failure.
> Many other parts around these motors may fail but not the Stepper motors.
>
> I think you are starting rumors- :)
>
> Steppir Antennas may have other problems like tape snarl up's or motor
> driver chips, but not the Motors.
>
> Mike, K6BR
>
>
>
> ----- Original Message -----
> From: <john@kk9a.com>
> To: <TOWERTALK@contesting.com>
> Cc: <jimlux@earthlink.net>
> Sent: Friday, January 22, 2010 8:30 PM
> Subject: Re: [TowerTalk] LP v SteppIR
>
>
> I have heard of a number of motor failures so I wonder how common this
> problem is. I suspect only the manufacturer knows this answer. If the
> antenna is mounted on a crankup tower repairing it may be somewhat easy,
> however if it is mounted 100 to 200 feet high with other antennas on the
> tower or in an H-frame like K9LTN's problematic phased array, repairing the
> antenna can be a lot of work and expense. It is true that any antenna can
> break and in choosing a product one should consider which one is built
> stronger and less susceptible to failure, along with comparing the
> electrical performance.
>
>
>
>
> To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
> Subject: Re: [TowerTalk] LP v SteppIR
> From: jimlux <jimlux@earthlink.net>
> Reply-to: "Tower and HF antenna construction topics."
> <towertalk@contesting.com>
> Date: Fri, 22 Jan 2010 07:08:03 -0800
> List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>
> <snip>
>
> There are complaints of motor/mechanism failures, but they're fairly
> infrequent, and, to be fair, you hear complaints about conventional
> antennas with broken traps, incorrect hardware, etc. And, because
> they're new and novel, the "reporting rate" on SteppIR problems is
> higher than for conventional antennas (e.g. you're more likely to find
> an online comment about a SteppIR problem than about a missing set of
> clamps in some other antenna)
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.730 / Virus Database: 271.1.1/2639 - Release Date: 01/22/10
> 12:33:00
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|