The manufacturer is right, they have done the design for their towers. You
can, if you want to pay for it, have it redesigned to your specifications or
to fit a situation that wouldn't permit the original design.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Doug Renwick [mailto:ve5ra@sasktel.net]
> Sent: Saturday, January 16, 2010 21:27
> To: 'Tower and HF antenna construction topics.'; 'K1TTT'
> Subject: RE: [TowerTalk] Guywires
>
> And if you really want confusing facts, the Delhi/Taco self supporting
> DMX - 68' in Canada specifies approximate (their wording) base widths of
> 46" x 48" deep bell bottom base. Soil type is omitted. So who is right
> and who is wrong?
>
> Doug
>
> I'll run the race and I will never be the same again.
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
>
> bounces@contesting.com] On Behalf Of K1TTT
> Sent: January 16, 2010 2:34 PM
> To: 'Tower and HF antenna construction topics.'
> Subject: Re: [TowerTalk] Guywires
>
> If you really want facts, the rohn catalog calls for a 2'6"x2'6'x4' base
> for
> 180' of 55g. but a 64' bx series rohn tower calls for a 5'9"x5'9"x4'
> base.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|