Will 600-800 watts (AL-811H) melt 60/40 solder?
I made a jumper for my ladder line, LARGE banana plugs on the end
plugged into a disconnect homebrew box with large jacks. The lugs on the
jacks came un-soldered.. don't know if it was from the power, or from
moving the ladder line and they broke loose or a bad solder job !
Anyway 60/40 is all I had that day
I'm going to resolder and see what happens
Thanks
John
KO4XJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|