Sorry Jim but who ever told you this is full of it. 6061-T6 is a alloy that
is designed to be bent a long way and not take a set. It will not crack or
orange peel.
Dave - K4SSU
----- Original Message -----
From: "jim Jarvis" <jimjarvis@optonline.net>
To: <towertalk@contesting.com>
Sent: Tuesday, March 24, 2009 10:40 AM
Subject: Re: [TowerTalk] 6061 vs 6063
>
> I verified with the Al tube vendor the 6061/6063 question.
>
> They're both the same price.
>
> 6061 is stronger. but if you need to put a bend in the material,
> 6063 is what you want.
> 6061 will crack or orange peel if you try to bend it. 6063 will not.
>
> N2EA
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|