Dan,
I'm using lots of segments - 10 times as many as the EZNEC Conservative
Auto Segmentation.
Lossless Average Gain is 0.00dB
Convergence testing - doubling the number of segments makes no
difference to any of the Gain or Loss figures.
I'm changing the wire dimensions, and watching the change in Average
Gain and the change in Gain at various elevation angles both in FS and
over Real High Accuracy earth. They're all slightly different - I was
then quoting an average.
Steve G3TXQ
Dan Zimmerman N3OX wrote:
> "
>
>
>
>
>
>
> #14 to #6 is about 0.04dB
> #6 to 2" is about another 0.04dB
>
> So 0.08dB going from #14 to 2". Not sure about the accuracy when dealing
> with such small numbers."
>
> You doing average gain tests and segmentation convergence testing?
>
> I bet you can change things +/- 0.04dB just by changing segments.
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|