Having been licensed since '63, RFI is not a stranger to me. I am in the
unique position of not having any RFI interference, that's right NONE !
The only way to have NO interference in this day of cheap electronics
devices is to not get on the air. I know it is sad, but it is true,
especially with an amp. If you are clean at 100 watts, stay at 100 watts.
The reason I have no RFI interference is that I have no station at home in
my residential neighborhood. I do have a remote station set-up, about 185
miles from home. I get on every day, operate where ever I want and have no
RFI. It is an extreme measure, but it works for me.
Everyone have a HNY.
Paul K2DB
-----Original Message-----
From: k2vi [mailto:k2vi@cox.net]
Sent: Sunday, December 28, 2008 3:09 PM
To: towertalk@contesting.com
Subject: [TowerTalk] RFI WITH MY NEIGHBOR...HELP!
This is only on one tv in there living room, the other two are not effected,
I checked for rf cable leakage and it was clean on 145.250 throughout the
house.This interference is ONLY with my voice(ssb) comming thru. The picture
is clean.Also it only happens on my ladderline fed doublet, the beam is
ok.also the dipole it used only on 80 and 40 meters.I narrowed it down to
there jumpers from the tv to the dvd which are not shielded.Also no problem
with running 100watts but 1kw my voice is loud.Any advice would be greatly
apreciated, thank you guys.
tony k2vi
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|