Question about securing the screw portion of turnbuckles and shackles:
Some turnbuckles and shackles have a hex head bolt and nut. Some have no
nut and the bolt head is flat with a hole in it. Some have a cotter pin.
The cotter pin will obviously keep the nut from coming off. But how does
one secure the bolt on the other two types to make sure it doesn't unscrew
due to vibration?
For the type with a flat head and hole, I presume the method might be a
small loop of wire through the hole and the shackle or turnbuckle opening.
But for the type with just a hex head bolt and nut (and no cotter pin) how
do you make sure that the nut doesn't eventually work it's way off? Blue
locktite?
73,
Michael - K5MEF
--
We are what we repeatedly do. Excellence, then, is not a single act, but a
habit. -- Aristotle
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|