Towertalk
[Top] [All Lists]

Re: [TowerTalk] Another Rotator EZ question / help

To: <n5pht@arrl.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Another Rotator EZ question / help
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Mon, 28 Jul 2008 17:17:07 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The Idiom Press web site has updated installation instructions for 
the "new" Hy-gain controllers.  You might check those instructions 
to see if they deal with the delay issues. 

73, 

   ... Joe, W4TV 
    

> -----Original Message-----
> From: towertalk-bounces@contesting.com 
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Gary Stone
> Sent: Monday, July 28, 2008 5:03 PM
> To: towertalk@contesting.com
> Cc: idiom@idiompress.com
> Subject: [TowerTalk] Another Rotator EZ question / help
> 
> 
> Greetings,
> 
> OK - received the Rotator-EZ mod in the mail today.  It is 
> assembled (not the kit form).
> 
> The instructions leave me with something I can't seem to know 
> for sure and hope someone here has the answer.  Wrote and 
> called Idiom but don't know if I will hear from them - sure hope so.
> 
> The Rotator-EZ puts in a 5 second brake delay.  This is one 
> of the nice features.  However, my control boxes (I have 2 of 
> them) are both fairly new and have the factory addition of 
> the 5 second delay.  From the Idiom Instructions I quote:
> 
> "Before going any further, remove any circuits added to the 
> rotator control box after its manufacture, especially brake 
> delay circuits, and insure that the rotator control box is 
> restored to factory design and specifications."
> 
> So, there is the problem.  My factory specs includes a brake 
> delay.  From the Hy-Gain manual there is an addendum sheet 
> explaining that this 5 second delay is now included.  But it 
> does not tell you what exactly was that addition - or how to 
> remove it.
> 
> I actually spoke to Rob's Father weeks ago before I ordered 
> the Rotator-EZ (can't remember his name or call) and that is 
> when I learned his Son had taken over Idiom and at that time 
> I asked this question an he said, "Well, you have to remove that."
> 
> So, has any of you the experience in putting in one of the 
> Idiom Press Rotator-EZ into a unit from Hy-Gain that already 
> has the 5 second delay? Tom is very helpful at Hy-Gain but he 
> is off for the week and I have placed email and call to Rob 
> at Idiom.  Any ideas appreciated.
> 
> Gary, N5PHT
> 
> 
> ****** Gary Stone, N5PHT ******
> **** 347 CR 1250 ****
> **** Savoy, Texas 75479 ****
> UNITED STATES OF AMERICA 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>