What freq was that measured at?
Mark N1UK G3ZZM
> ----- Original Message -----
> From: "Gedas" <w8bya@mchsi.com>
> To: <towertalk@contesting.com>
> Sent: Saturday, 12 April, 2008 5:11 PM
> Subject: Re: [TowerTalk] Coax Line Loss
>
>
>> 1.36 dB loss according to my windoze calculator. Only you can determine
>> if
>> that is good enough for your needs or not.
>>
>> Gedas, W8BYA
>> http://gedas.cc
>> http://www.w8bya.com
>>
>>
>>
>> ----- Original Message -----
>> From: <k6tfz@aol.com>
>> To: <towertalk@contesting.com>
>> Sent: Saturday, April 12, 2008 4:22 PM
>> Subject: [TowerTalk] Coax Line Loss
>>
>>
>>>I have 150 feet of 15 year-old Rg-214 still up. I measured the power in
>>>at
>>>50W and the power out (at the other end) at 36.6W using a dummy load
>>>terminator of 50 ohms. As it still good or should I change it? I would be
>>>interested in the calcs. I already did mine but want to be sure.
>>> Thank you.?? Geoff, K6TFZ
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|