In a message dated 2/18/2008 2:28:42 P.M. Pacific Standard Time,
towertalk-request@contesting.com writes:
> I have an older US Tower, model MDX-589. The motor is wired for 120V.
The motor label clearly shows it can be set for 240V.
I have had 240V brought to the tower site. Can someone tell me if the
raise/lower toggle switch needs rewiring for 240V?
If so what needs to be done? I know people with MDX-589 towers which run
at 240V but I don't know if the switching is the same.
Umm, I'm not an electrician but I don't think you can use 240V
without changing out the internals in the box; e.g. relays, delay timers, etc.
Cheers,
Steve K7LXC
TOWER TECH
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|