Towertalk
[Top] [All Lists]

Re: [TowerTalk] Base of tower waterproof enclosure

To: <towertalk@contesting.com>, "Bob Smith" <na6t@na6t.com>
Subject: Re: [TowerTalk] Base of tower waterproof enclosure
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 16 Jan 2008 16:00:23 -0500
List-post: <mailto:towertalk@contesting.com>


> Hi Charles et all
>
> below is a link that I use for waterproof enclosures for wireless
> installs.  The boxes are NEMA4 , a little expensive, the largest box with
> a non powered interior is about $250...

Typically the box used for most towers is going to be in the range of $100 
or less. However I use only metal NEMA-4 enclosures on the tower. I'm just 
more comfortable with the full shielding, BUT they are heavy and at least as 
expensive as the fiberglass ones listed in the link below. In addition I've 
not seen the steel ones available with the options of these.

Roger (K8RI)
>
> hope this helps,,
>
> http://www.hyperlinktech.com/web/nema_enclosures.php
>
>
>
> Bob Smith  NA6T
> Bob Smith
> Robert Smith Consulting
> "Wireless Installations -- Government, Businesses & ISP's"
> F.C.C. Licensed-Commercial & Amateur Services
> A.R.S NA6T
> ARRL Life Member
> 1-707-964-4931 w/answering machine
> Fort Bragg, California   95437
>
> "On The Air-Conditioned Mendocino Coast, In REAL Northern California"
> No trees were destroyed in the sending of this message.
> However, a large number of electrons were terribly inconvenienced.
> ------------------------------
>
> Message: 10
> Date: Wed, 16 Jan 2008 06:33:22 -0500
> From: "Charles Reiche" <reichec@verizon.net>
> Subject: [TowerTalk] Base of tower waterproof enclosure
> To: <TowerTalk@contesting.com>
> Message-ID: <001701c85833$9a664870$0201a8c0@desk>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Im having a bear of a time searching on ebay for a telecom style
> waterproof enclosure box that I could mount at the base of my tower
> and use as a junction box for any coaxes running to/from the
> tower.  I saw one at a local club's auction and now I am kicking
> myself for not bidding $25!!!   This box looked to be injection
> molded plastic with pem nut style threaded inserts so you could mount
> it to things and mount things inside it.  The size was about 12" wide
> 20" high and 10" deep. I would even go for a bigger box that coule be
> mounted to some 4x4s concreted into the ground next to the tower.
>
> Any help or ideas would be much appreciated.
>
> Charles Reiche
> N3CRT
>
> ------------------------------
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>