I bought a heavy-gauge steel box about the size you mentioned, but it
cost a lot more than that -- a little more than $100, I think, at
Crescent Electric (which has outlets all over, but not in every state).
The brand is Hoffman, IIRC. It has provision for adding a lock.
73
Alan NV8A
On 01/16/08 06:33 am Charles Reiche wrote:
> Im having a bear of a time searching on ebay for a telecom style waterproof
> enclosure box that I could mount at the base of my tower and use as a
> junction box for any coaxes running to/from the tower. I saw one at a local
> club's auction and now I am kicking myself for not bidding $25!!! This box
> looked to be injection molded plastic with pem nut style threaded inserts so
> you could mount it to things and mount things inside it. The size was about
> 12" wide 20" high and 10" deep. I would even go for a bigger box that coule
> be mounted to some 4x4s concreted into the ground next to the tower.
>
> Any help or ideas would be much appreciated.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|