Towertalk
[Top] [All Lists]

Re: [TowerTalk] DIN Connectors You Can't Solder To

To: John Becker <johnb3030@comcast.net>
Subject: Re: [TowerTalk] DIN Connectors You Can't Solder To
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Tue, 20 Nov 2007 15:01:10 -0800
List-post: <mailto:towertalk@contesting.com>
I remembered it wrong.  The pins are squeezed together.
I operated for several years with the wrong version of
the 8 pin inserted in my FT1000D.  Worked perfectly,
and never broke the socket.  It was a son of gun to get
in and out of the socket though, but I didn't need to
do that very often.

Rick N6RK

John Becker wrote:
> Michael Keane K1MK wrote:
>> Yaseu and Kenwood use the DIN-8/262 for the Band Data connector
>>
>> 73,
>> Mike K1MK
> Richard (Rick) Karlquist wrote:
>> Yaesu uses 270.  If you force a 262 plug into a Yaesu
>> radio, when you remove it you will see that the pins are
>> spread.
>>
>> Rick N6RK
> ????   ;-)
> 
> 73,
> 
> John, K9MM
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>