A search of various vendors, or a Google Search on 8-Pin DIN connectors and
cables should find cables of various lengths with 8-Pin DIN connectors. I
found what I needed at Amazon and as I recall the Mouser catalog may also
list cable assembliles
Roger (K8RI)
>
> I wonder if there are any vendors that supply various DIN and other style
> connectors, wired up, on one end and having raw tails, that can be
> soldered to more easily. Or perhaps complete cables, soldered, with the
> good molded stress reliefs, etc that are double ended, so that you could
> buy a 4 footer double ended DIN , chop in in half and put the particular
> connector needed on the raw end.
>
> All the Best, 73,
> Pat Barthelow aa6eg@hotmail.com
> http://www.jamesburgdish.org
> Subscribe: http://bambi.net/jamesburg.html
> Jamesburg Earth Station Moon Bounce Team
>
>
>
>
>> Date: Tue, 20 Nov 2007 09:48:59 -0600
>> From: johnb3030@comcast.net
>> To: towertalk@contesting.com
>> Subject: Re: [TowerTalk] DIN Connectors You Can't Solder To
>>
>> I've been following this thread with interest since I need to buy an 8
>> pin DIN connector myself for the band data connector of my FT-1000.
>>
>> I notice in Jameco's catalog that they now have many products available
>> in both conventional and "RoHS compliant" versions, and this includes
>> DIN connectors. I will certainly NOT be ordering an RoHS compliant DIN
>> connector.
>>
>> It seems obvious that the design of the DIN plugs is such that they are
>> surely intended to be hand soldered. That raises the question of what
>> the manufacturers of the RoHS compliant version are doing to ensure that
>> this is possible. There must be a type of wire solder and flux that is
>> RoHS compliant. Otherwise why make an RoHS compliant connector which
>> requires hand soldering? What solder and flux should be used?
>>
>> I'm also wondering in the case of the original poster, who received
>> unsolderable connectors with some ICE filters, if it is possible that
>> ICE obtained their connectors from the least expensive source possible,
>> and if that source was possibly some off-brand third world vendor who
>> wasn't terribly interested in quality control. Is this an isolated
>> problem or one which many have experienced?
>>
>> Does anyone know who actually makes DIN connectors?
>>
>> 73,
>>
>> John, K9MM
>>
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|