Ask your doctor for a lead test, that is a standard blood test they should
be able to do for you if you have any questions.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Pat Barthelow
> Sent: Saturday, November 17, 2007 22:30
> To: Martin Ewing - AA6E; 'Tower Talk List'
> Subject: [TowerTalk] Health Studies, electronic workers
>
>
> Does anyone know of actual Medical studies done on people in the
> electronics industry who handle lead bearing solder over a period of
> years? For some years, back in the olden days, I worked in both Q/A and
> production of a sensor manufacturer. Proibably hand soldered 300,000 or
> more through hole componnent-pcb connections. The Old fashioned way.
> Under a lamp, with a Panavise, Weller WTCPN, and a handful of thin guage
> Ersin Multi or Kester 60-40 solder, constanty broken off a nearby 1 lb
> spool. (Spools used to be around $10.... not any more! ) The solder was
> held and fed through my index finger and thumb, mostly, and, at the end of
> the day, you culd see darkened skin on thumb and forefinger, seemingly
> minute lead deposits right where the solder was held. It even tingled a
> bit, or felt different where the lead solder was fed through the fingers.
> I washed hands at the end of the day, or more often. Also, back then,
> we did not even use fans to divert the rosin sm
> oke from our noses while at work. I wonder if any measureable lead could
> be found in ones bloodstream who did that kind of work. Also is there any
> lead compounds likely to be wafting up with the rosin smoke? Any medical
> research actually been done on techs from the oldend days?
>
>
> All the Best, 73,
> Pat Barthelow aa6eg@hotmail.com
> http://www.jamesburgdish.org
> Subscribe: http://bambi.net/jamesburg.html
> Jamesburg Earth Station Moon Bounce Team
>
> > Date: Sat, 17 Nov 2007 15:48:25 -0500
> > From: aa6e@ewing.homedns.org
> > To: towertalk@contesting.com
> > Subject: Re: [TowerTalk] DIN Connectors You Can't Solder To
> >
> > "Reduction of Hazardous Substances" (RoHS) is a European initiative
> > which requires manufacturers to use non-lead-bearing solder for
> > commercial electronics devices, among other practices. You have to
> > follow these rules if you want to sell in EU -- in practice, the world
> > electronics business is following suit.
> >
> > See
> >
> http://en.wikipedia.org/wiki/Restriction_of_Hazardous_Substances_Directive
> >
> > The rules don't apply to hobbyists, but most of the stuff we will buy
> > will be RoHS compliant. In practice, this means that soldering is
> > trickier because you have to use higher temperature solders.
> >
> > On the other hand, we might all preserve our mental faculties a little
> > longer! (One of the symptoms of Pb poisoning is reduced IQ.)
> >
> > 73 Martin AA6E
> >
> > David Robbins K1TTT wrote:
> > > First, what is RoHS???
> > >
> > > Most likely they are plated with chrome. I would take some fine
> sandpaper
> > > and scratch the plating of the top of the pins, that at least gives a
> little
> > > area to tack onto. If the pins have a hollow on the back like most of
> them
> > > find a drill or jeweler's file that fits in there and scrape out the
> plating
> > > also. This also works for chrome plated pl-259's since most all of
> these
> > > types of things are just plated brass.
> > >
> > > David Robbins K1TTT
> > > e-mail: mailto:k1ttt@arrl.net
> > > web: http://www.k1ttt.net
> > > AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> > >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|