Hi Brad:
My crank up tower is 150 feet away from the shack and I use LMR-600 from
the single point ground to an antenna switch at the base of the tower. I
use Davis Bury-Flex for runs up the tower and in close to the radios.
This arrangement works great. I added a 6M yagi this past year and
simple plugged it in to the antenna switch. I used LMR-400UF because I
had it around; I would not hesitate to use Bury-Flex with this as well.
I may re-think plugging the 6M beam into the switch and just run LMR-400
straight back to the radio as a separate run of cable.
73, Jamie
WB4YDL
Brad L. Tracey wrote:
> I'm put up a HDX-555 and wondering what coax other crank up towers owners are
> using for HF & 6 meters? Is any one just using a single coax and switch? Good
> or Bad? Is anyone using the LMR 400 UF? Any input would be great.
>
> Thanks
> Brad, N3NRN
> Red Lion, PA
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|