Joe,
Thanks!
This is excellent!
I have included your original email in this post, because attachments don't
get through the list.
Vy 73,
Gordon, W2TTT
"I switched to Led replacement bulbs quite a while ago.
They don't burn out so fast.
I found that the BA9s-A 28v AC/DC
Amber LED from superbrightleds.com gave a nice light, soft, and MUCH less
heat than the old traditional type bulbs.
I'm switching ALL my pilot light devices to led replacements."
-----Original Message-----
From: Joe Giacobello, K2XX [mailto:k2xx@swva.net]
Sent: Sunday, July 01, 2007 2:16 PM
To: J. Gordon Beattie, Jr., W2TTT
Cc: kd4e@verizon.net; TowerTalk@contesting.com
Subject: Re: [TowerTalk] Polarized Electrolytic in Rotator Box?
Gordon, they are 1819s or 1820s. However, another past post suggested
using 28 volt LEDs. I bought them and they work well. They fit directly
in the original socket. I am also using them for the meter lights in my
Titan amps. I don't have the supplier's name here at this time, because
I'm away from home. Maybe someone else can provide it.
73, Joe
K2XX
J. Gordon Beattie, Jr., W2TTT wrote:
> OK, now the question is: what's the spec on the light bulbs used in Ham
III
> and IV controllers and where do you get them? Waaaaaaay back when, I
bought
> them at Radio Shack and many local places that don't exist anyone.
> 73,
> Gordon, W2TTT
> 201.314.6964
> W2ttt@att.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|