Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hy-Gain T2X Rotator Question

To: "'Bill Jackson'" <k9rz@radiks.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Hy-Gain T2X Rotator Question
From: "Gary Schafer" <garyschafer@comcast.net>
Date: Sun, 22 Oct 2006 10:57:18 -0500
List-post: <mailto:towertalk@contesting.com>
I wonder what that response might have been??

Maybe there is something I don't understand but I see so many times those
responders to a question do not post to the list.
I can understand not wanting to get beaten up about posting information that
is not true or that others don't agree with but without some review some old
myths get carried on for years. 
Also others do not benefit from some of the very useful information and or
myth busting that can take place.

73
Gary  K4FMX

> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Bill Jackson
> Sent: Sunday, October 22, 2006 8:29 AM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Hy-Gain T2X Rotator Question
> 
> I received a response that answered my question.  It looks like I'll be
> ordering a new motor on Monday.
> 
> Thanks again to the Towertalk gang, a great resource for information!
> 
> 73 de Bill
> 
> ----- Original Message -----
> From: "Bill Jackson" <k9rz@radiks.net>
> To: <towertalk@contesting.com>
> Sent: Saturday, October 21, 2006 9:41 PM
> Subject: [TowerTalk] Hy-Gain T2X Rotator Question
> 
> 
> > Hello Towertalkians,
> >
> > This is a question for those of you who rebuild your own Hy-Gain
> rotators.
> >
> > I am in the process of rebuilding a T2X.  It appears that the motor
> shaft
> has excessive vertical play, which is allowing the bottom of brass pinion
> on
> the motor to catch on the third spur gear.  I assume the top of motor
> shaft
> is supposed to have some type of retaining ring to keep the shaft from
> dropping down inside the motor.  Can anyone tell me what type of retaining
> ring this is?  It is not listed or shown on the parts diagram, since it is
> a
> sub-part of the motor assembly.  Hopefully I can find a suitable
> substitute
> at the local hardware store.  The motor assembly is $70.00!
> >
> > Thanks in advance.
> >
> > 73 de Bill
> >
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>