Towertalk
[Top] [All Lists]

Re: [TowerTalk] RF on stainless steel

To: Red <RedHaines@centurytel.net>, g3rzp@g3rzp.wanadoo.co.uk,TowerTalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] RF on stainless steel
From: Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>
Reply-to: g3rzp@g3rzp.wanadoo.co.uk
Date: Tue, 13 Jun 2006 17:01:27 +0200 (CEST)
List-post: <mailto:towertalk@contesting.com>
Red,
So in an Austenitic stainless steel, the only factor (other than frequency) 
affecting skin depth is the resistivity, and in that respect, stainless steel 
will be no different to any other non-magnetic material. Provided it's an 
Austenitic stainless, as opposed to one of the other varieties of stainless, 
such as the magnetic ones (some of which actually rust!).

73
Peter G3RZP
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>