At 10:05 PM 12/10/2005, AD5VJ Bob wrote:
>I am trying to do an approximation.
>
>I am using NEC and am trying to look at my end feed wire
>but can not find an end feed wire in the models.
>
>Does anyone know which model I can use that would be best
>suited for an end feed horizontal wire with no feed line.
>
>It is not a dipole.
>
>It is just a horizontal wire (109.7 meters long up at 6.1
>meters) that comes straight to my tuner which has
>capability of tuning a single random wire antenna.
SO where's the ground wire from your tuner connected? to the earth? Put
wires in your model to represent the wire from the tuner to ground (it will
need to "touch" the ground in your model, i.e. z=0). Put the feedpoint
where the tuner is.
> 73 fer nw,
>Bob AD5VJ
>
>10X# 37210, FP#-1141, SMIRK#-5177
>http://www.n5iet.com/
>Code may be taking a back seat for now,
>but the pioneering spirit that put the code
>there in the first place is out front of it all.
>
>
>
>
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|