Towertalk
[Top] [All Lists]

Re: [TowerTalk] Foam cables and velocity factor

To: "Tom Rauch" <w8ji@contesting.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Foam cables and velocity factor
From: "Robert Chudek" <k0rc@pclink.com>
Date: Sat, 12 Nov 2005 09:49:32 -0600
List-post: <mailto:towertalk@contesting.com>
Tom,

That's what the analyzer is telling me, 2.3 ohms.

My final "adjustment" is going to be taking the 1:1 balun out and feeding 
the antenna direct with the RG-8x. I will rerun the test and see if this 
changes any of the numbers.

73 de Bob - K0RC

----- Original Message ----- 
From: "Tom Rauch" <w8ji@contesting.com>
To: "Robert Chudek" <k0rc@pclink.com>; <towertalk@contesting.com>
Sent: Saturday, November 12, 2005 4:35 AM
Subject: Re: [TowerTalk] Foam cables and velocity factor


>> changed too. For example, the impedance and resistance dropped from 43 to
>> about 2.3 ohms. Thinking about this for a moment, these numbers make 
>> sense.
>> If I am feeding a 2.3 ohm antenna with 50 ohm coax, I should have a 
>> pretty
>> high vswr.
>
>
> 2.3 ohms?
>
> _____________________________________________________
> This message scanned for viruses by CoreComm
> 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>