Group, I have 2 - F12 606 I stacked and phased together @ 13 ft spacing, my
question is, the B-1 balun I had (about 5 years old ) is about 12 in long and
the new one I was sent was 6 inches long. I made the 12 inch baluns cable 6
inches shorter. Have I done this correct? I figured the total lenght of the
phasing cables need to have the balun as part of the feed lenght too. So, 1
cable with balun of 6 inches is 16 1/2 feet and the coax with the 12 inch balun
is 16 ft. Is that correct ?
Thanks for any replies,
Pete NA2P
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|