Hi,
I just finished putting down 56 radials for a 160M shunt-fed tower I'm working
on. Now I know why I put this off so long.
One question I have - I have an 18" square copper plate with holes drilled and
tapped around the perimeter to allow attachment of the radials. My tower is US
Towers 72' crankup with a steel base (painted black). Tower of course is
galvanized. Tower attaches with 18 bolts to this painted steel base. If I
attach the copper plate to the steel base can I assume good connection from the
tower through the 18 bolts or should I make some other connections from the
tower to the copper plate?
Also, any suggestions how to attach the copper plate to the steel base.
Thanks much,
Richard - KJ7CU
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|