Gary,
To fit a tailtwister inside of an LM-470, you need to add a spacer
underneath the rotor plate to raise it up about 1 1/2 inches. A piece of
angle iron
is what the factory used to supply. It had a short piece of threaded rod
welded on and the rotor plate had holes in each corner. I've used stainless
steel hose clamps to hold the angle pieces in place and the plate rest on top.
It gives you that extra clearance for the rotor ears to clear the diagonal
bracing.
Skip, KJ6Y
_Communications Service Co_ (http://members.aol.com/kj6y/skip.html)
818-887-3569
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|