Pete Smith wrote:
> Surely there is a rigger's trick for doing the initial pick as you describe
> and then transferring the lifting point to the top of the stick as it
> approaches vertical
Sure.
Assuming a 100' tower, attach a c. 60' cable to
the tower at the 100' level AND the 50' level.
Grab the center of the 60' line with the crane hook.
As the tower goes vertical, the crane hook slides along
the 'basket' and ends up just above the top of the
tower. The tower still doesn't hang perfectly vertical,
but it's a lot better than if grabbed solely at the 70'
level. To ensure frictionless slip along the basket,
you can hang a pulley on the crane hook for the basket
line to pass through.
--
Steve K8LX
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|