Steve: Go to N3OC web page. Lots of pictures. We put up two 100 foot
R 45 one day with a crane. Lifted the top 90 feet of each with 20+ foot
chrome molly mast in a single pick Guys were pre-cut and attached and
while the crane held up the tower we hooked and tensioned the guys. We
decided on a pick point of (if I remember correctly) 78 feet up because
of the big masts. Would have been even easier if it had been a pier pin
install, but alas was not that way. Piece of cake! Easiest two tower
install I have ever done. Had a good crane operator tho and that is
important. 73 bob de w9ge
K7LXC@aol.com wrote:
> has
>anyone had any experience lifting a bunch of 45G together, say 100' without
>bending it in the middle?
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|