Towertalk
[Top] [All Lists]

Re: [TowerTalk] Securing the cables to the tower?

To: "'towertalk reflector'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Securing the cables to the tower?
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Thu, 2 Jun 2005 15:09:07 -0500
List-post: <mailto:towertalk@contesting.com>
While I agree with your choice of cheap tape from an economic standpoint, it
may not be suitable for warm, humid climates found near the gulf coast.  I
have found the cheap tape does not hold up well in the Houston area.  Also,
it leaves a black, sticky residue when removed.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of k1ttt@arrl.net
Sent: Thursday, June 02, 2005 7:31 AM
To: towertalk reflector
Subject: Re: [TowerTalk] Securing the cables to the tower?



i'm sure you'll get lots of fancy arrangements with tie wraps, cover them
with tape, chinese finger traps, loops of copper wire, etc.  just buy some
cheap electrical tape (not scotch, get store brand stuff).  and wrap it
around in a nice thick layer to hold the cables to the OUTSIDE of the tower
legs, don't put them inside, that just makes more work later.  its cheap,
doesn't crimp coax, easy to cut off and replace when you change cables.
yes, you will change cables, or add or remove them, everyone does
eventually!  i have never had it there long enough to fail.  just one thing
to keep in mind, when you add a new cable resist the tempation to just tape
it over the old layers, take off the old tape and replace it when you add
something new or it just gets harder to take off later when there are
multiple layers going between cables.




> What are people using to secure their feeders and other cables to the
tower and at what interval(s)? I'm expecting to have two (maybe three, if I
put a VHF/UHF beam up as well) runs of coax, plus 4-conductor rotator cable,
plus the control cables for the SteppIR and the Icom AH-4 tuner. The tower
will be an AN Wireless -- with 60-degree angle legs, so I'm thinking of
tucking the cables into that angle as far as possible.
Would the black (UV-resistant) cable ties work, if I can get long enough
ones?
> Alan NV8A
> _______________________________________________
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk






_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>