I understand that the Chinese Elm hedge grows very rapidly in most
areas such that it would cover an "ugly" fence within a year or two.
> I would like to get/make an anti-climb device for my tower. It is a 70'
> motorized crank-up/pull-down tower by Tashjian Towers. I won't be able to
> clamp anything around the legs because of the moving contact points between
> the tower sections. In addition, the motor, gear box, and cable drum
> protrude at the bottom. I was thinking that a sheet metal shield starting
> above the level of the motor, bear box, and drum might work, but am unsure
> how it could be attached without interfering with the moving parts of the
> tower. A fence around the tower is out of the question for aesthetic
> reasons, therefore my only option is to fence in the back yard. Does anyone
> figured out how to make an anti-climb device for such a tower?
> Craig, AE7I
--
Thanks! & 73, doc kd4e
|_|___|_|
| | & | |
{|
/\ {|
/ \ {|
/ \ {|
/ @ \ {|
| |~_|~~~~|
| -| | |
============\ # West Central Florida
KD4E ==============================
http://bibleseven.com
Ham PC = 100% Linux Novell-Suse 9.2
Halli, Heathkit, Homebrew, MFJ, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|