Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ground planewire. Insulated or uninsulated?

To: "Kirk" <kirk.harding@cox.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Ground planewire. Insulated or uninsulated?
From: "Michael Tope" <W4EF@dellroy.com>
Date: Sun, 20 Mar 2005 07:57:39 -0800
List-post: <mailto:towertalk@contesting.com>
----- Original Message ----- 
From: "Kirk" <kirk.harding@cox.net>
To: <towertalk@contesting.com>
Sent: Sunday, March 20, 2005 7:27 AM
Subject: [TowerTalk] Ground planewire. Insulated or uninsulated?


> This has probably been discussed many times but after a quick search of
> the archives I'm not finding a definitive answer.
>  
> I have 1000 feet of insulated #12 that I am planning to install as a
> radial system for a planned top band inverted L.  I have several ground
> rods that will be places in each radial path (one or two each radial).
> My question; what am I giving up using insulated radial wire vs
> un-insinuated?  
>  
> Appreciate your responses.
>  
> Kirk, K6KAR
> Niceville, FL


In terms of RF performance, I don't think you would notice the 
difference between insulated and un-insulated wire. If the wire
is going to be on the surface of the ground or buried just below 
it (you didn't specify), the un-insulated wire might be better from 
a lightning protection point of view.

73 de Mike, W4EF...............................



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>