The dial lamp in my G-1000SDX rotator control unit burned out. I opened the
unit and found the lamp which is PL1 and part number 125 and described as an
axial lamp. It is a clear glass cylinder 3/4 inches long and 1/8 inches in
diameter. It has a filament inside and pigtail leads on each end. From the
schematic it appears to be powered by 10 volts AC.
Can someone provide info on where to obtain a replacement lamp?
Thanks very much-Chuck Kresge DU3NXE du3nxe@mozcom.com
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|