Re: [TowerTalk] How to stiffen a mast

["W1GOR" <W1GOR@Maine.RR.Com>]

Oh, Shannon,

"1-1/2" solid inside 2" tubing 1/4"wall tubing" sure sounds like an 
'oxymoron' to me...<grin>  If you can make 'SOLID TUBING' you might win the 
Nobel Prize in dual molecular physics... ...or, at least Government 
'double-speak'... <big grin>

Maybe some clever scientist can devise a variation of viagra for metal...?

73, Larry - W1GOR

"The true delight is in the finding out, rather than in the knowing."
......Isaac Asimov


----- Original Message ----- 
From: "Shannon Boal" <Kingsautomotive1@alltel.net>
To: "Towertalk@Contesting. Com" <towertalk@contesting.com>
Sent: Monday, January 31, 2005 9:11 PM
Subject: [TowerTalk] How to stiffen a mast


> Pat,
>    I use 1-1/2" solid inside 2" tubing 1/4"wall tubing, for a boom.I found
> some at a scrap yard in Ocala, FL, for $2.00/#. I only reinforce the area
> that is attatched to the rotor, about 2' long. I file off any burrs in my
> metal lathe. It has to be a bit of a loose fit, to be assembled.
>          That which does not bend, may break, YMMV
>                Good luck, and God bless!
>                   Shannon K4GLM
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk