Re: [TowerTalk] Station Ground

["Alan NV8A (ex. AB2OS)" <nv8a@att.net>]

On 01/15/05 07:08 pm Jim Lux tossed the following ingredients into the 
ever-growing pot of cybersoup:

> > We should always run a common low resistance buss along the
> > bench and tie everything to it. That buss should be commoned
> > with the neutral of the power line entering the operating
> > position, and can (and probably should) tie into the shack
> > entrance panel ground if it is close.

> That one might get you in trouble with the electrical code inspector.  I
> think (but can't find my code handy) that the neutral and electrical safety
> ground are supposed to be bonded at only one point, and that's the service
> entrance.

Tom already corrected that error.

You might be able to rebond the neutral at a subpanel, but I'm
> not sure.

According to my understanding that's not OK either. And, as an example, 
the main breaker in our house is on the inside wall of the garage, back 
to back with the meter on the outside. The only other thing in that box 
is a breaker for the garage circuit. The remaining breakers are in a 
subpanel in the basement, and the neutral bus there is isolated, with 
its own separate conductor from the panel in the garage.

Alan NV8A

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk