Re: [TowerTalk] Weatherproof Sealant

[W0UN -- John Brosnahan <shr@swtexas.net>]

Keith--

Professionals doing outdoor enclosures KNOW that you CAN'T seal a box.
You MUST let it breathe and drain.  Best to give it a good umbrella and
drain holes for condensation.

When I sold my company to Vaisala, OY, a large maker of environmental
sensing devices -- weather stations, radiosondes, etc -- they agreed that
they NEVER try to seal an outside enclosure.

Temperature changes cause it to breathe air in and out.  With time and more
temperature changes, the humidity condenses and never goes out unless
given a way to drain.  (Unless you do a full MIL-SPEC hermetically-sealed
enclosure.)

73--John   W0UN


At 09:17 AM 1/11/2005, Keith Dutson wrote:
> I need to weatherproof a relay box.  Under test conditions it accumulated an
> inch of water in the bottom over a six month period.  What is a specific
> brand of silicone sealant recommended?  I understand the kind with vinegar
> smell (acetic acid) will corrode electronics components in a sealed
> environment.  Also, is there a need to insert a desiccant in the box?
>
> The box is NEMA industrial type, made of plastic with neoprene o-ring seal
> on lid.  However, there are many holes drilled for stainless hardware used
> to mount the relay and connect wires to the exterior.  The relay itself is
> the open contact variety with self-cleaning contacts (hot switch 20 watts
> RF), and supposedly impervious to damp conditions.
>
> Thanks for any advice.
>
> Keith NM5G


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk