Re: [TowerTalk] Rusty tower

["Floyd Sense" <fsense@copper.net>]

I'm with Bill.  I refurbished an old Rohn 25G this year, and used sandpaper 
and then the Rustoleum from Home Depot.  I then sprayed a coat of ultra flat 
black Krylon, available from WalMart.  I found it necessary to allow the 
Rustoleum to cure for 24 hours before applying the Krylon to get the best 
result.  The black Krylon will fade in extreme sunlight in a few years, 
ending up much lighter - about medium gray.

K8AC

----- Original Message ----- 
From: <Cqtestk4xs@aol.com>
To: <giw@bellsouth.net>
Cc: <TOWERTALK@contesting.com>
Sent: Saturday, December 18, 2004 10:56 PM
Subject: Re: [TowerTalk] Rusty tower


> Some guys don't like it, but I use Rustoleum Cold Galvanizing spray.  I 
> have
> used it on stuff I could not galvanize or had rusted.  I used sandpaper 
> and
> wire brush to prep it. It has lasted a long time in this humid Florida
> environment.  It's available at Home Depot.
>
> Bill K4XS
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk