To: | larryj@teleport.com, towertalk@contesting.com |
---|---|
Subject: | Re: [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions |
From: | W0UN -- John Brosnahan <shr@swtexas.net> |
Date: | Sat, 20 Nov 2004 16:35:45 -0600 |
List-post: | <mailto:towertalk@contesting.com> |
Larry-- Here are some options for you. 1 Call New-Tronics and ask for a manual : Service 940-325-1386 Sales 877-994-9499 http://www.new-tronics.com/ 2) Go to the web page on this antenna and look at the overall dimension. (15 ft 4 in) That will give you a decent clue--then tweak for SWR http://www.new-tronics.com/main/html/base_model_g7-144.html 3) Go to the eham Reviews section and ask some of the guys who have posted recent reviews. They have an antenna and probably a manual. http://www.eham.net/reviews/detail/2837 4) Check out the Boat Anchor site -- NO it is not there, but that is a good place to start. http://bama.sbc.edu/ There are other web sites with manuals--but you can probably find them as easily as I can. 73--John W0UN t 03:50 PM 11/20/2004, larryj@teleport.com wrote: _______________________________________________I just picked up a Hustler G7-144 2-Meter antenna at a local garage sale. It is in very good condition, but it's missing the very top piece of aluminum tubing. I'd guess that it's supposed to be a piece of 3/8" aluminum tubing. There's a piece of fiberglass about 4 feet from the bottom, and above that, there's about a 1/2" tube with a small "hose clamp", which looks like its expecting a piece of 3/8" tubing to be inserted and then tightened up. I'm also guessing that this is the only piece that's missing, besides a little plastic cap that might go on the top to keep water out. See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: [TowerTalk] Welding Aluminum Tower, Bob Kellow, W5LT |
---|---|
Next by Date: | [TowerTalk] Ring Rotor motor disassembly?, Jon Zaimes AA1K |
Previous by Thread: | [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions, larryj@teleport.com |
Next by Thread: | RE: [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions, Dale Martin |
Indexes: | [Date] [Thread] [Top] [All Lists] |