I just picked up a Hustler G7-144 2-Meter antenna at a local garage sale.
It is in very good condition, but it's missing the very top piece of
aluminum tubing. I'd guess that it's supposed to be a piece of 3/8"
aluminum tubing. There's a piece of fiberglass about 4 feet from the
bottom, and above that, there's about a 1/2" tube with a small "hose
clamp", which looks like its expecting a piece of 3/8" tubing to be
inserted and then tightened up. I'm also guessing that this is the only
piece that's missing, besides a little plastic cap that might go on the top
to keep water out.
Does anyone know of a web site with the dimensions for this antenna? I can
see the previous locations where the other pieces were fit together, but I
mainly need the length of the total amount of tubing that is above the
fiberglass section. I'd be happy to pay for a photocopy of the instructions
and postage, if anyone has the instruction sheets. Or if it's available
somewhere on the web, that would be even better yet.
Thanks and 73,
Larry
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|