Maybe "Penetrox" or a similar product ? Look at the DX Engineering website
(or elsewhere) for details.
73,
Malcolm, K3KZ
----- Original Message -----
From: "WA4MWM" <wa4mwm@triad.rr.com>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Thursday, November 04, 2004 7:34 PM
Subject: [TowerTalk] Protectant for beam connections
> I am finalizing the assembly of some Force 12 beams. Where the balun
> attaches to the driven elements and where element jumpers are installed
> (bolts through the elements attached to balun leads with ring connectors -
> mostly #10 and 1/4" size), they recommend "spraying" the contacts to
protect
> them from moisture, corrosion, etc.
>
> What is recommended to use for this? I need to make this as permanent as
> possible since this area will be inaccessible after installation without a
> crane and personnel bucket.
>
> Thanks,
>
> Cliff
> NC4CB
> Winston-Salem, NC
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|