Towertalk
[Top] [All Lists]

[TowerTalk] Yaesu Rotator connector replacement

To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu Rotator connector replacement
From: kelly@thejohnsons.ws
Date: Wed, 03 Nov 2004 13:35:40 -0800
List-post: <mailto:towertalk@contesting.com>
I need to replace my Yaesu Rotator Control Cable, which means that I have
to remove the connectors on both ends and put those connectors on 
a new cable.  Anyone have some helpful hints or tips for removing
the pins from both connectors?  I've use pin extraction tools in the
past for similar connectors.  Will those tools work with these pins?


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>