I would think that calling up an industrial bearing supplier (I used to use
King Bearing, Inc. in Los Angeles.. I think they are now part of
applied.com) and spending a bit of time describing what you want would turn
up something exactly like you need. There are literally thousands of
different bearings available in every conceivable size, speed, load rating,
seals, etc.
----- Original Message -----
From: "Tower (K8RI)" <tower@rogerhalstead.com>
To: <Jamesnf@aol.com>; <rfman45@hotmail.com>; <TowerTalk@contesting.com>
Sent: Friday, September 10, 2004 8:29 PM
Subject: Re: [TowerTalk] R-8 Vertical and Added Radials
> I've seen quite a few requests about thrust bearings.
> has any one thought of making thrust bearings out of taper, or wheel
> bearings. As they are steel they would require protection from the
> elements, but man they are rugged.
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|