It's probably too thin to weld and a mechanical clamp may be a better
solution. Polyphaser makes a clamp (PT#58R-112S) that will attach 1 1/2"
wide strap to a 5/8" ground rod.
----- Original Message -----
From: "Jason Dugas" <kb5urq@hotmail.com>
To: <towertalk@contesting.com>
Sent: Sunday, August 22, 2004 21:40
Subject: [TowerTalk] Cadwelding Copper Flashing (?)
I have searched and searched throughout the archives of TowerTalk and have
not been able to ascertain the definitive (or even a good idea) method for
cadwelding copper flashing to copper-clad rods. Is this possible? Has
anyone done it? I did see one email that referred to Cadweld's commercial
molds for doing this but am not sure which product the author was referring
to.
About to put down a ground system for my tower using copper flashing and
would like to hear the best method for making the bond from the flashing to
the rods.
Thanks in advance,
Jason
KB5URQ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|