Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaessu G-45A rotor connections

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaessu G-45A rotor connections
From: "Bill VanAlstyne" <w5wvo@cybermesa.net>
Date: Sun, 9 May 2004 07:57:20 -0600
List-post: <mailto:towertalk@contesting.com>
Ed Laughery wrote:

> So the only way I am deciding which pin is #1
> (missing  pin) is thru the schematic where it
> appears that looking at the back of the unit,
> the pin layout would be:
>
> 123
> 456
>
> Is this correct?

Looking at the Molex plug on my G-450A, it would appear that you're correct! Pin
1 of the chassis-mounted female connector is the upper-left and is numbered as
you suggest.

Bill / W5WVO


>
> Any help, confirmation, will be appreciated.
>
> Ed AD5JV
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more.  Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>