[TowerTalk] Tower Tip

[blkcat28@atlantic.net (John Silberman)]

ROTORS... Whether it's yours or someone else's, connect it on the ground
to the control box that will be used at the station and check that the
rotor functions properly before you put it up.  You can double check
NORTH at the same time. There's always some nasty vocabulary when it
doesn't work after all that time and effort putting it up, and if you
did check it, you know it's your cable and don't start doubting the
rotor or box.  Of course you all already knew that but I just had to say
it.

John
KB4CRT