| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [Towertalk] Lighting Protection and Roof Towers |
| From: | K7LXC@aol.com (K7LXC@aol.com) |
| Date: | Thu, 12 Dec 2002 13:22:10 EST |
In a message dated 12/11/02 4:18:15 PM Pacific Standard Time,
jhisson1@columbus.rr.com writes:
> What type of compound should I buy to make
> sure the corrosion is minimized where the copper strap/wire and ground rods
> meet?
You need an anti-oxidant paste. It comes in several flavors - NoAlOx,
Penetrox, etc. - by several different companies. Just check the label that
it's for your materials (most are copper, aluminum, or copper/aluminum) and
go nuts.
Many hardware stores and all electrical supply houses have them.
Cheers,
Steve K7LXC
TOWER TECH
|
| Previous by Date: | [Towertalk] Amphenol Silver Plated Teflon Center PL259, Kimo Chun |
|---|---|
| Next by Date: | [Towertalk] Lighting Protection and Roof Towers, K7LXC@aol.com |
| Previous by Thread: | [Towertalk] Lighting Protection and Roof Towers, Dale L Martin |
| Next by Thread: | [Towertalk] Lighting Protection and Roof Towers, K7LXC@aol.com |
| Indexes: | [Date] [Thread] [Top] [All Lists] |