I meant to reply to this thread sooner. I have been studying the subject
again as I prepare to stack up some 25G. Rohn drawing A810214R6 is titled
"Foundation and Anchor Tolerances," has the following tolerances for guyed
towers:
------------------------------------
Guy Radius: plus or minus 5% of distance specified
Anchor Alignment (perpendicular to guy radius): 0.1 degrees
Anchor Rod Alignment with guy radius: plus or minus 1.0 degree
-----------------------------------
Doesn't seem like they leave much room for fudging. I just eyeball things
and measure the best I can and luckily, I have pretty level ground to work
with.
All the best,
Matt--K7BG
P.S. There are many other tolerance factors listed in the above mentioned
Rohn drawing.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <towertalk@contesting.com>
Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/2002
|