Towertalk
[Top] [All Lists]

[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question

To: <towertalk@contesting.com>
Subject: [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question
From: n2mg@eham.net (Mike Gilmer, N2MG)
Date: Wed, 18 Sep 2002 22:22:44 -0400
Look at the pic in the middle left side for the correct placement.

http://www.rohnnet.com/rohnnet2001/catalog/pdfs/25G/25G-15.pdf

Nice drawing, but what it doesn't show is the "bump" in the guy bracket
horizontals where they pass over the z-brace at the tower welds (would be to
the right in the drawing).

Mike N2MG



<Prev in Thread] Current Thread [Next in Thread>