| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question |
| From: | n2mg@eham.net (Mike Gilmer, N2MG) |
| Date: | Wed, 18 Sep 2002 06:55:08 -0400 |
That bracket sounds like a standard Rohn bracket. When installed (properly), it should nestle in the Z-braces and not have any room to slip down. Mike N2MG NA9D wrote: > One thing I noticed was that the guy bracket had literally slipped > downward slightly on one of the guys. I thought I had gotten it > tight, but apparently that was not the case. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Towertalk] Antenna Requirements for High-Band DXing, Chris BONDE |
|---|---|
| Next by Date: | [Towertalk] EMOTO Antenna Co. Model EV700D5X, Heiko Schön |
| Previous by Thread: | [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Jon Ogden |
| Next by Thread: | [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Jon Ogden |
| Indexes: | [Date] [Thread] [Top] [All Lists] |